Fabrication & Rapid Prototyping

The School of Architecture maintains an extensive number of fabrication and rapid prototyping technologies.

This equipment is owned by the School and used exclusively by the Architecture Students.  Often this equipment is available on a walk up and use basis. Student prepare files and directly operate the equipment.

Equipment Overview:

Studio Laser Cutter

Quantity = 8

Cutting Bed Size: 18” x 32”

Reserve Equipment Online

Industrial Laser Cutter

Quantity = 1

Cutting Bed Size: 52” x 50”

Reserve Equipment Online

CNC Tangent Cutter

Quantity = 1

cutting Bed Size: 46” x 47”

Reserve Equipment Online

5 Axis CNC Mill (Robot)

Quantity = 1

Cutting Volume:72” x 270 Degrees; Floor Mounted Turntable: 360 Deg

Reserve Equipment Online

Large CNC Mills

Quantity = 2

Cutting Bed Size: 48” x 96”

Reserve Equipment Online

Desktop CNC Mills

Quantity = 2

Cutting Bed Size: 19.6” x 15.7”

Reserve Equipment Online

Water Jet Cutter

Quantity = 1

Cutting Bed Size: 20” x 40”

Reserve Equipment Online

CNC Foam Cutter

Quantity = 1

Cutting Volume: 96” x 96” x 48”

Reserve Equipment Online